H-Addon

Heating mantle including temperature controller for heating solid-state-battery test cells

Benefit from the precise and fast way of heating your solid-state-battery test cell by means of the H-Addon.

  • Heats your CompreCell 6/12 or 12-DP from room temperature to +250 °C
  • Precise temperature control: +/- 0.1 °C
  • Fast and comfortable assembly and handling
  • Embedded serial communication for automated measuring procedures
  • Fully implemented in CompreDriveControl

Typical applications

The default application is to heat the CompreCell 6/!2 or CompreCell 12-DP to allow for temperature dependent measurements:

  • Determination of the temperature-dependent conductivity of solid electrolytes

  • Cycling solid-state batteries at different temperatures

  • Stripping-plating experiments at different temperatures

Selected views and impressions

Detailed Description

The H add-on is compatible with the CompreCell 6/12 and the CompreCell 12-DP. It is not compatible with the CompreCell Pouch. It is designed to enable the electrochemical testing of solid electrolytes or all-solid-state batteries while precisely regulating the applied temperature of the sample between room temperature and +250 °C.

The heater can be adjusted to ensure best thermal contact to the cell. Moreover, the heater has a built-in insulation to lower its outer temperature. It is also connected to protective earth to provide shielding of the cell from electromagnetic noise. In addition, the GND connector of the measuring device can be connected to the heater as well.

The CompreDrive H add-on is equipped with a serial connection interface which enables the communication between any PC and the temperature controller. Using this interface, automated temperature-dependent measuring procedures can be established. 

The CompreDrive HC add-on is fully implemented in CompreDriveControl enabling automated temperature adjustment during measuring procedures.

  • Mains voltage:

UAC (rms) = 115 to 230 V, 50-60 Hz

  • Mains fuse:

5 A

  • Heater voltage:

UDC = 48 V

  • Temperature range during operation (measuring cells):

Toperation = room temperature to +250 °C

  • Temperature range during operation (environment):

Tenv. operation = +10 °C to +40 °C

  • Temperature range during storage:

Tstorage = +10 °C to +40 °C

  • Relative humidity (RH) for working and storage area:

(non-condensing) 0 to 80% RH

  • Atmosphere during storage:

non-corrosive

  • Rated dimensions of the temperature controller unit:

33 cm x 19 cm x 16 cm (L x W x H)

  • Total weight:

5.6 kg

  • Art. No.: 

840107

  • Essential features at a glance:
  • Temperature range during operation (measuring cells): Toperation = RT to +250 °C
  • Mains voltage: UAC (rms) = 115 to 230 V, 50-60 Hz
  • Embedded serial communication to temperature controller
  • Compatible with CompreDriveControl software

Get in touch with us

Are you interested in working with us to address your challenging tasks? Then please contact us:

Contact us

Follow us