Non-visible page test
This page should not be visible from the main menu
Application note test
- Application notes
Cathode Active Material Stress/Strain Behaviour and Electronic/Ionic Conductivity
Mechanical properties of two types of NMC were studied by employing an in-situ dilatometry setup based on three LVDT sensors. At the same time, ionic and electronic conductivity was measured at different temperatures and pressures.
- Application notes
Pouch Cell Cycling with Pressure and Thickness Monitoring in the ComprePouch
A pouch cell was cycled under controlled temperature and pressure while monitoring the cell thickness and pressure as well as the pressure distribution.
- Application notes
A Wire Ring Reference Electrode for Sintered Oxide Ceramic Solid-State Battery Samples
In this application note, we describe a wire-ring reference electrode that can be pressed against the sides of a pre-sintered electrolyte pellet to allow for a three-electrode configuration.
- Application notes
All-Solid-State Battery Testing up to 407 MPa using the CompreFrame
The capabilities of a new CompreCell DP with 10 mm diameter pistons were demonstrated in the CompreFrame pressure application frame using two NMC|LPSCl|Graphite solid-state battery cells, with and without a lithium metal reference electrode.