Typical applications
The CompreCell 12-DP is the ideal solution for the layer-by-layer assembly of solid-state batteries and allows for studying them in a 2- or 3-electrode configuration at different stack pressures and temperatures:
Cycling of solid-state batteries under active stack pressure and temperature control
Pressure- and temperature-dependent investigation of a solid-state electrolyte’s conductivity
Stripping-plating experiments under actively controlled stack pressure
Selected views and impressions
Detailed Description
The next generation of solid-state battery test cells – the CompreCell 12 DP: The CompreCell 12 DP is a measuring cell designed for use with the CompreDrive or CompreFrame. It is airtight (helium-leakage tested over complete accessible temperature range) and can therefore be used to handle sensitive samples by filling the cell in a glovebox under inert gas atmosphere and then measuring it outside.
The CompreCell 12 DP is a measurement cell suitable for measuring multilayer stacks of solid samples, like all-solid-state batteries, under active pressure control. It is also suitable for powdered samples and allows e.g. pelletizing in-situ.
An intuitive design facilitates the layer-by-layer assembly of an all-solid-state battery starting from the separate component materials: Both hard metal plungers in the cell can move independently and therefore apply pressure to a stack at a fixed position in the inner sleeve. This allows for measuring sample stacks that are sensitive to vertical movement and minimizes the risk of cracking and short-circuits through the layers.
As sleeve material, AlOx, PEI, and PEEK are available. The fixed location of the sample also facilitates the use of a solid-state reference electrode for 3-electrode measurements. On demand, we could also provide a version for 6 mm diameter samples (CompreCell 6 DP). The CompreCell 6 DP can only be operated in 2-electrode configuration due to limited space.
Technical Details
- Temperature range during operation:
- Max. sample thickness:
10 mm
- Piston diameter:
6 mm or 12 mm
- Piston material:
hard metal (90% tungsten carbide, 10% cobalt)
- Temperature range during long-term storage:
- Temperature range during storage for drying and pre-conditioning:
- Max. applicable force:
- Max. applied voltage:
- Relative humidity for working and storage area:
(non-condensing) 0 to 80% RH
- Atmosphere during storage:
non-corrosive
- Rated dimensions:
6 cm x 6 cm x 13.4 cm (L x W x H)
- Total weight:
approx. 1.3 kg
- O-ring material:
FFKM
- Reference electrode options (onlye with upgrade to CompreCell 12 DP-3e version):
Based on thin metal wires, e.g. gold-plated tungsten wire, either embedded in the electrolyte or pressed onto the perimeter; attention: in case of metal wires pressed onto perimeter: min. wire thickness = 0.5 mm.
Key Data
- Art. No.:
840340 (12 mm, PEI sleeve),
840341 (12 mm, PEEK sleeve),
840342 (12 mm, Al2O3 sleeve)
- Essential features at a glance:
- High quality setup for solid-state battery research
- Compatibility with CompreDrive and CompreFrame
- Airtight measuring cells allowing for the handling of sensitive samples outside of a glovebox
- Large range of applicable force up to 75 kN
- Large range of sample temperature from -40 °C up to 250 °C
- Universal compatibility with all potentiostats/galvanostats.
- 2- and 3-electrode setups due to the option to embed a reference electrode
Related application notes
- News and insights
Measuring Solid-State Battery Electrode Expansion in situ with the CompreDrive
- News and insights
New Publication: Si Nanowire All-Solid-State Battery
- Application notes
Distinguishing Bulk and Grain Boundary Conductivity in Solid Electrolytes
- Application notes
